Close-Coupled vs Low-Level Cisterns: Why the Spare Parts Differ

[melindaarmfield]

See the details at visit the following webpage.

A bottom-entry fill valve, by contrast, takes its supply vertically through the base of the cistern, in line with where a rising main or supply pipe comes straight up from the floor void or from beneath a low-level suite. This arrangement is generally quieter, since the incoming water enters below the surface of the tank rather than splashing in from the side, which is why many modern and replacement fill valves are built as bottom-entry as standard, often with a side-entry option built into the same body.

Read more from visit the following webpage.

Two cisterns can sit on near-identical pans and still take completely different spare parts, and the reason comes down to how the cistern connects to the toilet below it. Close-coupled and low-level designs are the two most common configurations found on UK jobs, and confusing the two when ordering spares is one of the easier mistakes to make on a busy round.

Get the wrong flush valve on a low-level system and the flush pipe will not seat properly, leading to leaks at the joint that only show up once the cistern has been refitted and the access panel closed up again. Get a close-coupled flush valve into a low-level tank and the outlet is simply too short to reach the flush pipe collar at all.

Find out more at visit the following webpage.

[Автор]

Сообщения